Product Details
Product Feature
The Orbital Tube To Plate Welding can be an ideal facility to reduce the time required for thick plate welding and even save the use of filler metal. Due to the high and reliable performance, we do promise that there is no need to use electrodes, no worry about electrode contamination or damage. Compared with ordinary product on the market, it can be placed at an appropriate distance.
The workpiece of our Orbital Tube To Plate Welding can be placed in a closed space, and the laser beam can be focused on a small area. The range of weldable materials is wide, and various heterogeneous materials can also be joined to each other. It is easy to automate high-speed welding, which can also be controlled by digital or computer. When welding thin materials or thin-diameter wires, it will not be as susceptible to melting back as arc welding.
2. Technical Introduction
3. Parameter Tables
Input power three-phase four-wire |
380 10% V |
Rated output capacity |
13.9 KVA |
Rated input current |
19 A |
Rated no-load voltage |
73 V |
Rated operating current |
400 A |
Current adjustment range |
4-400 A |
Rated load continuous rate |
60% |
Pulse width adjustment range |
10-90% |
Pulse frequency adjustment range |
0.2-10 S |
Pulse current waveform |
Square wave |
Current frequency adjustment range |
More than 30 S |
Welding torch speed |
0.2-5 S |
Wire speed |
50-2000 mm |
Weldable pipe outer diameter range |
12-90 mm |
Argon flow |
Less than 15 min |
4. Operating Frame Stroke
Horizontal movement stroke |
1600 mm |
Vertical movement stroke |
1500 mm |
Minimum welding height |
500 mm |
5. Welding Structure
6. Welding Quality Show
http://www.weldingmac.com/