Product Details
Master Deer Cut-Off Wheels General Purpose – flat/depressed – steel
Abrasive: Aluminum oxide A-Medium-hard, multipurpose tool of hardness T with high cutting performance and long tool life.
Choose the wheel according to your practical application.
Applications: Cutting of sheet metal, profiles and solid material.
Available in a range of sizes and thickness.
Wheel thickness1.1mm/1.5mm/1.8mm/2mm 2.4 mm for multipurpose cutting work
Wheel thicknesses 3.2/3.0 mm for maximum tool life and high lateral stability.
Suitable for use on angle grinders of all output categories.
Best Choice for 3 Advantages:
- Excellent resin bonded agent, safe, good sharpness and strength, especially suitable for high power angle grinder.
- Reinforced mesh discs, tight combination with net and abrasive materials, high properties with cutting and bending strength.
- Suitable for all kinds of metal, ss, steel, alloyed steel
Frequently asked questions and solution for cutting wheel:
Possible Causes
|
Solution
|
The cutting wheel consumption fast
|
The hardness level of wheel is low
|
Select and adopt the models with high hardness level
|
The grinding pressure is too huge
|
Decrease the grinding pressure
|
The inner bores of cutting disc craze
|
The cutting disc gets stuck in the work piece
|
Move forward and backward evenly, and exert pressure along the diametrical direction
|
The cutting disc is used to grinding
|
Use the grinding disc in grinding process
|
The pressure of side direction is too huge
|
Avoid the flange plate with the same diameter in inner side and outside
|
The diameter of inner side and outside is inconsistent
|
Apply the flange plate with the same diameter in inner side and outside
|
The edge crazes while the abrasion wheel is cutting
|
The diameter of the flange plate is too small
|
Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel
|
The loading pressure of the flange is so huge that the flange edge of abrasion wheel of deforms
|
Adjust the pressure of the flange and abrasion wheel to reasonable level
|
It is used with improper force while cutting
|
Decrease the load while cutting and reduce the pressure in side direction
|
The diameter of the flange plate is too small
|
Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel
|
The fracture of work pieces is burnt severely
|
|
The hardness level of abrasion wheel is over high
|
Adopt the abrasion wheel of low hardness level and high efficiency
|
The work rate of the equipment is low
|
Replace it with high work rate
|
The belt of the cutting machine is loose
|
Adjust the tightness of the belt
|
The hardness level of abrasion wheel is over high
|
Adopt the abrasion wheel of low hardness level and high efficiency
|
http://www.kaijie-abrasive.com/